Cadillac Tuning for Results – Shift RPM

Engineers spent many hours & iterations to optimize the tune in your Cadillac.  But once you make some changes to the configuration and performance of the Cadillac, where is the best tune now?

cartestredlinecomparison2

I continue to enjoy Cartest2000 as an analysis tool.  This what-if analysis shows a comparison between a modified STS-V with 500 hp using a 6400 rpm redline (shiftpoints, which since the program assumes the automatic shifts at redline become the effective redline) and one shifting at 6800 rpm.  The LC3 engine in the STS-V has an actual redline at 6800 rpm, so we are well within the design operating range of the engine.  Waiting to shift at 6800 rpm gives a 0.11 advantage in 0-60 time, and a 0.15 advantage in the quartermile.

hptunersshiftpoints2

This table shows the shift logic for the 6L80 used in the STS-V.  The transmission starts to shift from 1->2 at 30 mph, 2->3 at 58 mph, and 3->4 at 94 mph.  When it actually shifts is around 0.3 seconds after this point.  If the vehicle is at maximum acceleration from a standing start that may hit at redline; at slower acceleration on the highway that may hit below redline.

cartestparamsensitivityrpm2

This graph is a parameter sensitivity analysis — used to show if one varies the shift point, what the result is in order to study how sensitive that result is to this parameter.  In this case, we see the ideal effective redline or shift point for the quartermile would be around 7100 rpm.

Hp Tuners Gauge View

Hp Tuners Gauge View

This graphic shows a gauge view from a HP Tuners scan at the moment the car opted to shift from 2 to 3 under wide open throttle acceleration — at 58 mph as expected.  Although at wide open throttle, during this shift the engine reached a max of 6,087 RPM — not near the 6400 RPM or 6800 RPM.

The shift completed around 0.4 sec later at 67 mph.  Note: click on images to see them larger; hit back to return to article.

My conclusion is that a slightly higher speed & RPM for wide open throttle shifting in sport mode would be within design parameters, and beneficial for performance.

 

More STS-V quick iPhone shots at minigolf

Had a few minutes as we waited for the rest of our party to join for mini-golf so I took some photos of the freshly waxed Cadillac STS-V.

Click on the thumbnails to start slide show mode.

Still needs more cleanup but parked under a tree in the evening was fair lighting, if a bit dark.

Daily Driver Detailing — Cadillac Rubs #Motorama @Meguiars @Portercable

Let’s talk daily driver detailing. My Cadillac is a daily driver.

IMG_0576

Shot of my 2008 Cadillac STS-V during a recent trip. This is the car we are working on today.

My garage was previously a  storage locker / reality show — it is much improved after a recent clean-up.  This combination was not good for keeping the paint on the car nice and unmarked.

IMG_0602

Before buffing — our target is the black ‘rub’ mark in the rear door.

Today I set out to correct some issues.  One prime candidate was this shoe-polish like smear or scrape on the passenger door.  This appeared to be a large black ‘rub’, not sure from what.  I assume it came along in a parking lot, although it is possible someone opened the door against stuff previously kept between the cars in my garage, or even that it was hit by a piece of a tire at some point (?).

My tools of choice today were a Porter Cable buffer, a cutting pad, and Meguiar’s correction compound.  I used a PC speed of 5K rpm.  First I lavished the correction compound onto the pad, then with the buffer off I brushed with the buffer to spread a coating of the compound onto the spot and the rest of that panel.  With the buffer on, I moved it in a circular pattern across the spot from several different directions.

After Buffing the Rub spot

After Buffing the Rub spot

Although resistant at first, this process cleaned the rub up nicely.  I had to look at the previous photo to see where the rub was & re-position the bottle of cleaning compound for the comparison ‘after’ shot.

I then worked on some other less obvious spots.

Shot of the hood (bonnet) after waxing

Shot of the hood (bonnet) after waxing

Finally, I switched to a waxing pad and finishing wax, and waxed the car by section.  I grabbed this snap looking across the front hood to give an impression.

It still needs some more work & attention, but this was a good start on getting a few items taken care of.  You can just see our chihuahua mix out enjoying the morning in the last photo.  There were other ways to solve these issues, but using the buffer and Meguiar’s compounds was a simple and direct way and was successful in cleaning up or clearing up some of my STS-V’s imperfections.

Advice & Good ideas for Daily Driver Detailing?

Do you have advice on paint improvements?  Hit the comments and share!

 

Update:  How to tell you will need more product soon:

IMG_0605

It is hard to tell from the iphone pics, but with waxing the Silver STS-V looks increasingly reflective.

I tried to capture a before / after sequence for the rear side view:

The difference is subtle on the iphone.  In person it does look better.