In Pursuit of a Lighter Cadillac CTS

One of Cadillac’s plans for the next Cadillac CTS refresh is to make the CTS one of the lightest cars in its class.  One assumes they will do this through additional use of Aluminum, and high strength steel.  The advantage of high strength steel is that for the same properties a thinner, lighter piece can be used that has the same or better strength and durability.

There is a 2-3% improvement in fuel economy for every 100 kg (220 lbs).  So although the EPA cycle is complex, in general a 28 mpg CTS might break 30 mpg with the loss of around 500 lbs of weight from its 3,681 lb curb weight.  Obviously there is a limit to the fuel economy that can be gained in this manner, since Cadillacs one can safely say will always have some weight.  Cadillac’s goal of being the lightest in their vehicle class seems ideal.  This goal is one that will have to be revisited in the crowded markets Cadillac competes in.

Cadillac CTS Safety Cage

The Cadillac CTS currently uses Advanced High Strength Steels in strategic structural locations.  Advanced High Strength Steels (AHSS’s) are multiphase steels which contain martensite, bainite, and/or retained austenite in quantities sufficient to produce unique mechanical properties (transformation hardening).  AHSS’s exhibit an excellent combination of high strength and high formability resulting primarily from their high strain hardening capabilities. AHSS’s can be further classified by tensile strength; the ideal application for different tensile strength AHSS’s varies.

A recent study by Lotus Engineering confirms that a total vehicle, synergistic approach to mass reduction is feasible and could result in substantial mass savings with minimal piece cost impact.

I am very excited about the emphasis at Cadillac on weight management, as it will also make my favorite Cadillacs more nimble and athletic — when you lose weight you just FEEL better!

2 thoughts on “In Pursuit of a Lighter Cadillac CTS

  1. I’m a bit confused. Will the weight reduction be on the current Sigma II CTS (as a mid-cycle enhancement) or on the all new Alpha CTS?

    Also, do you happen to know the weight on the CTS’s Ultraview sunroof? I had found a loaded 2008 CTS which was competitively priced, but the sunroof killed it for me. Not only does it add weight, but Cadillac uses a light mesh to cover the glass…and it lets in way too much light.
    .-= David Anton´s last blog ..A Focus, a Metaphor, and the Future =-.

  2. Hey David,

    The weight reduction will be in the refresh of the CTS which is coming in 2012 as a 2013 model or 2013 as a 2014 model, not sure which. Sigma II is being phased out in favor of the flexible Alpha platform, which will underpin the smaller ATS and the larger CTS, as well as the next gen Camaro.

    Normally I hear the sunroof referred to as 100 lbs. Not sure how accurate that is.

Please leave a Reply